Buy the Save America’s Windows book right here.
Order online and pay with with your credit card or PayPal.
Or, give me a call and order from a real person. That’s right, I answer my own phone and am happy to talk with you. 207 773-2306. –John
Shipping is via United States Postal Service, Media Mail, and takes two to three weeks.
Need it right now? You can now get some topics as immediate digital downloads. Check it out here: Immediate Digital Downloads
Covers traditional methods and the latest in modern high-tech materials and techniques. Learn how to avoid falling under the spell of the window replacement salesman. Specific step-by-step repair and maintenance treatments. Window project profiles. National directory of 200+ window specialists who will save your windows and not try to sell you replacements. This is the new 2013 edition with many revisions, an all new chapter on sash glazing and painting; and an expanded directory with hundreds of window specialists, some in every state. 177 pages, 257 illustrations.
Figure 56. Filling Window Sill Weather Checks. Fill only the checks (cracks) … Do not coat the entire sill with epoxy which can trap moisture promoting decay … Step 4. Fill the checks with epoxy filler. The epoxy must completely fill the checks. For deep or very narrow checks first mix a batch of filler that is of a thinner consistency that tends to flow into the checks on its own. Spread it onto the surface and press it into the checks with a putty knife …
Step 6. Trim Filler. When the filler has cured trim off the excess. This is most efficiently done with a very sharp hook-type paint scraper. Skim off just a bit of the surface of the wood between the check to remove any wood that was saturated with the primer to reveal bands of bare, untreated wood. The bands of bare wood are needed to allow moisture to pass out of the sill…
Figure 62. Removing Sash. If the sash is still stuck use a “Window Zipper” tool. Lay the bottom of the tool flat on the face of the sash stile. The bottom is smooth and flat so it will not scratch the face of the sash. You may have to stick some thin tape or adhesive paper on the bottom of the tool or on the face of the sash to keep from marking the finished surface of the sash. Keeping the bottom of the tool flat on the face of the sash, run the curved toothed edge of the tool along the joint, sawing through the paint buildup into the joint. The top of the tool is rough and will rasp away paint buildup within the joint as well as rasp a little wood off the back side of the bead making room for the sash to move. Work the Zipper tool all along both side beads and the header bead if there is one. The exterior joint between the sash and the blind stop may also be painted shut, which you will have to work on from the outdoors side of the window.
Click here to download a PDF file of some sample pages: SaveAmericasWindowsSamplePages
Hi John –
I’ve used some of the techniques that you’ve published on this site to repair the windows on my 1915 Central Texas farm house. Your site played a large role in helping me decide to keep the existing windows rather than install replacement sashes. Two down, twelve more to go… Soon I’ll use salvaged windows to enclose the back porch. I’ve just ordered your book and am looking forward to learning more. Thanks for making this information available.
Wishing you a happy New Year,
– Ben
Hi Ben –
Thanks for ordering the book, I’ll send it right out to you. Best of success working on your windows. If you have any question, post them over at the Forum:
http://saveamericaswindows.com/forum/index.php
John
Hello John,
Just reading again on your site! You kindly spoke with me some years ago on my 1900 Folk Victorian window repairs … I am embarrassed to admit I have only covered them and not done any repairs … I have slept a lot since then! Now I care for my grandson, so five meals a day are priority :) I am committed to getting 2 windows done before winter! Thanks so much for your teaching us!!
Jane
Jane, thanks for the update. With your grandson there, please pay close attention to controlling the lead/health risk by using lead-safe work methods.
Calling to order the book in a.m. wondering HOW TO “reframe” both sashes of the one 36×72. I salvaged clapboard siding and the installer COVERED the top of the window, put it in opening crooked with the upper rail of the sash inside the side rail on one side, not on top where the rabbet is fitted :( . At present I can put my HAND between the sash and the rough opening. Of course water has entered this wall, had no siding from 2000 til 2014, only tar paper and 6 mil sheeting… NOW This Old House etc use an adhesive material to cover the rough opening to prevent water from reaching the wall. I so hope your book will show me how to seal appropriately AND how to redo the sill, angle for saw etc… I really need to move my home back east and just hire you! You mentioned your Sister and her handyman? being south of me 15 hours! All as planned I will call and order in the morning! Thanks … Jane
Jane, thanks for calling to order the book just now. I’ll send it right out.
If the book does not cover the details you need, register over at the discussion forum:
http://saveamericaswindows.com/forum/index.php
where you can attach photos to your questions and I’ll give you detailed guidance.
Hi John…Just wondering if you might have any referrals of someone who could replace several windows in my 1925 Mediterranean style home in Los Angeles. Most are beautiful original wood windows… several have been replaced with aluminum sliders,,,
Yuck! Having trouble finding someone who can/willing to do this type of wood window replacement. Any suggestions would be appreciated.
Hi R, the book listed above has a national directory of window specialists, with a full dozen in California, and three who work in the greater LA area, two of them specialize in making windows that match the details of older windows.
If you get the book and none of the listed specialists are responsive, let me know and I’ll see if I can scare up a couple more for you to consider.
Hi John,
I am a master carpenter and I am on the board of directors of a non profit, Save our Shotguns Apalachicola. Our goal is to preserve and to provide housing in the historic area of Apalachicola, FL. We would like to restore / replicate window sash and are interested in techniques and material source resources. Is this something that your book addresses? Thanks, Pete
https://www.facebook.com/SaveOurShotguns/
http://www.nationalregisterofhistoricplaces.com/fl/franklin/districts.html
Hi Pete, Please order the book above. It contains the national directory of window specialists, with several in Florida, some that restore and make windows, one of them gives regular training sessions.
Hello, John,
Dan Mitchell out of Central Maine gave me your name and contact information. I am restoring the exterior of a non-profit office location (a 1835-36 brick and granite house) in Augusta, Maine. I have some questions about windows……might you have a moment to speak with me at some point……or should I just list my questions and send to you? I believe the windows are from a later period than the origin of the house. They appear differently in photos that we have from the early 20th century. The windows are basically in good shape (I think) but I want to take them back to how they looked in the late 1930’s. We are also adding the shutters back to the building. Any suggestions or recommendations would be greatly appreciated.
Do you still say that sash corners should not be glued? How do you prevent the meeting rail from coming loose when somebody is banging on it to get a stuck sash to move?
A problem in my old house (1883) is that the sash are stained on the inside and modern wood is too coarse-grained to stain. Do you have a source for close-grained white pine? I was quoted $10/board ft. for C-select, ordinary quality.
Do you still say that sash corners should not be glued?
Yes, sash joints have not been glued for centuries, and it still works today. Without glue the wood can expand and shrink slightly without weakening the joint. Glue can trap moisture in the joint leading to decay and joint failure.
How do you prevent the meeting rail from coming loose when somebody is banging on it to get a stuck sash to move?
Sash joints are held together by steel pins or wood pegs. Some are made with a dovetail that holds the joint together. To prevent stress on the joints eliminate banging by keeping the sash in good condition so it slides freely in its tracks.
Do you have a source for close-grained white pine? I was quoted $10/board ft. for C-select, ordinary quality.
Look for old-growth lumber at salvage companies that pull wood out of old buildings. Good wood is costly and always has been, even in the old days. If you don't have dollars to spend on wood, keep an eye out for renovation and remodeling projects where you can often snag some old planks for little or nothing.
Couldn’t find a way to edit. I’ve been ill, not will. Sorry.
Pingback: Do these traditional wood windows need replacement? – Cleveland Sash
Pingback: Weatherstripping for double hung wood windows – Cleveland Sash
Hi John,
I’m starting 40 window restoration and have set up my steambox. I have a Jiffy wall paper steamer that doesn’t seem to have enough power to do the job. What’s your steamer of choice for this application. Also I don’t think I have the grinder technique to pull off making my own profile scraper. Any ideas on how I could circumvent this problem?
Thanks for the fascinating videos!!
John McIlhoney
John, it’s good to hear you are saving some windows.
What is the model number of your Jiffy Steamer? It could be something else about your steam setup that is not working. Let us know more about your setup. Can you post a few photos of your setup? The best place to do that is in this discussion over at the Save America’s Windows Forum, where you can register, post questions and photos:
http://saveamericaswindows.com/forum/viewtopic.php?f=10&t=5199
Pingback: Sash Stile End Check Repair | Repair-kit.space
I have windows that have a metal weight in the hollow of the windows which is attached to a rope. I am looking for someone who could restore the string locks to this window. I love the color and style of this window. I am finding that no one likes to restore old windows. They would prefer you replace them with metal and spend thousand of dollars to take away the antique balance within your home. I don’t know if there are any old school carpenters.
Denise, I’m not sure what you mean by “string locks.” The Save America’s Windows book has a national directory of hundreds of window specialists, some in every state, who know how to work on these windows. If you get the book, contact all the specialists in your state, and still can’t find someone, let me know and I’ll see if I can scare up someone for you.