Sash Glazing Putty & Rabbet Pre-treatment Test

Remove old panes & putty, cut & clean glass, putty & paint.
Site Admin
Posts: 176
Joined: Thu Aug 29, 2013 8:21 pm
Location: Portland, Maine, USA

Sash Glazing Putty & Rabbet Pre-treatment Test

Postby johnleeke » Fri May 09, 2014 8:09 pm

Sample panels for side-by-side field testing of various glazing compounds and putties and their adhesion to various pre-treatments of the glazing rabbets.
This brief update was done on 5/9/14. The tests were placed in 2005 and 2007.

Posts: 12
Joined: Fri May 30, 2014 9:53 am

Re: Sash Glazing Putty & Rabbet Pre-treatment Test

Postby patrick » Mon May 04, 2015 2:11 am

Hello, John, as you know I'm in the early stages of window sash assessment and doing considerable research on materials and methods. I keep wavering back and forth between an American system and a Swedish system. I'm of the generation that has always been a bit cavalier about environmental health and safety, but as I get older it actually becomes a more important consideration. I read the Aquaglaze MSDS (a major contender for my window restoration) and it contains butyl benzyl pthalate, a plasticizer, along with the required calcium carbonate. Those are the two ingredients listed. BBT is being phased out in Europe and Canada as it is classified as a toxic substance, FWIW to those who follow your website.

Return to “Glaze & Paint Sashes”

Who is online

Users browsing this forum: No registered users and 2 guests