Fein Multi-Master Tool, ossilating saw

What is the stuff that really works? Where to get it. Why do you like it?
johnleeke
Site Admin
Posts: 176
Joined: Thu Aug 29, 2013 8:21 pm
Interests:
Location: Portland, Maine, USA
Contact:

Fein Multi-Master Tool, ossilating saw

Postby johnleeke » Mon May 18, 2015 3:55 pm

FEIN MultiMaster FMM 350 Q
Image
This is an oscillating power tool, the shaft vibrates rotationally but does not revolve in a full circle.
Video: https://youtu.be/kgvL34cu6s4?t=1m16s
When used with saw blades it give a very controllable cut. I have never used it for sanding, as I do very little sanding in my window work. The older 250 model is adequate for window work and costs about $25 less than the newer 350, which is quieter and costs about $170 when the starter kit in a bag is purchased. There is also a cordless model.
Supplier: Amazon, http://www.amazon.com/s/ref=nb_sb_noss? ... s=Fein+FMM
Manufacturer's website: http://www.feinus.com/en_us/multimaster ... ltimaster/
The three saw blades I use most are:

E-Cut Universal saw blade, No.: 6 35 02 151 11 0, cuts wood and metal
HSS segment saw blade No.: 6 35 02 106 01 5, cuts wood and metal
HSS circular saw blade, offset No.: 6 35 02 144 01 4, cuts wood and metal
Supplier: Amazon, http://www.amazon.com/s/ref=nb_sb_noss_ ... saw+blades
Manufacturer's website: http://www.feinus.com/en_us/multimaster ... es/sawing/

Return to “Materials, Products, Tools, Equipment, Shop Setup”

Who is online

Users browsing this forum: No registered users and 1 guest